1/8" NPT Miniature Adjustable Pressure Relief Safety Valve 10-600 PSI

This valve is the pressure relief valve we use inside of our low pressure regulators modified to fit into a 1/8 NPT fittings.

Optimal pressure is 250-400 psi..

Max input pressure is 4500 psi.

 Setup: 

• Submerse in water or spray with soapy water.
• Set your device to just below the bleed pressure.
• then adjust the screw till it stops leaking.
• Raise the pressure to test the unit.

Note:  It is possible to bury screw the down all of the way and disable the safety.  This can also be used as release valve with a 5-16x24 Thumb Screw.